OXIDIZED BITUMEN 85/25

Oxidized Bitumen 85/25 would be one of the main bitumen products of PETRO-ACC that is used for Varnish and Bitumen coating and Asphalt sheets. this grade of Bitumen has higher penetration and lower softening point and we are exporting this grade to countries that have temperate weather.

Enquiry Form

Category: Bitumen Products

Product Info

OXIDIZED BITUMEN 85/25 MSDS

Material Safety Data Sheet of Oxidized Bitumen 82/25
Product Name	Blown Bitumen 85/25
EC NO	265-196-4
CAS#	64742–93–4
Color:	Black Brown
Odor:	the characteristic odor of bituminous products
Odor Threshold -ppm:	NA
pH:	NA
Boiling point °C:	NA
Hazards Identification	resulting from physicochemical properties: Not classified for humans: Not classified In normal usage conditions, the product is hot. It may cause burns and emits vapors. When working with hot bitumen any contact with vapors must be avoided. In case of prolonged storage in closed containers, hydrogen sulfide may be released from bitumen, with concentration reaching hazardous levels. for the environment: Not classified In normal usage conditions, it presents no hazard to aqueous and terrestrial organisms. However, in the case of building and insulation works it is necessary to heat up the product, which causes the release of vapors and their emission into the atmosphere.
First Aid Measures	Inhalation: Immediately move the affected person to fresh air, place the person in a lying position, and loosen the clothes; if the person is not breathing, give artificial respiration; if no heartbeat is detected, apply external cardiac massage combined with artificial respiration using a respirator, cover the affected person, ensure a calm atmosphere; do not administer any fluids to unconscious persons and persons with disturbance of consciousness. Transport the affected person in a recovery position. Skin contact: Cool the burn area as quickly as possible to reduce further heat-related injuries. Cool the burn area with cold running water for at least 10 minutes. Avoid excessive cooling of the body. Do not attempt to remove bitumen from the burn area. Upon cooling down, bitumen forms a waterproof, sterile layer on the burn surface, protecting it from drying. Polluted clothing may be taken off, provided that it has not stuck to the skin. Eye contact: Flush thoroughly with a slow stream of potable running water for at least 15 minutes with eyelids retracted, remove contact lenses, do not wipe the eyes, and place a sterile, loose dressing on the eyes; consult an ophthalmologist. Ingestion: Do not induce vomiting as the product may get into the respiratory tract. Do not administer any oral medication. If no improvement is observed, seek medical assistance. 4.2. Most important symptoms and effects, both acute and delayed Not specified. 4.3. Indication of any immediate medical attention and special treatment needed In case of accidental contact of hot bitumen with skin, do not attempt to remove the bitumen. In each of the cases listed above, if the symptoms persist, seek medical attention immediately or take the affected person to the hospital, showing the product packaging or label.
Fire-Fighting Measures	5.1. Extinguishing media Suitable extinguishing media: Carbon dioxide, dry chemical, expansion foam, sand, diffused water currents, extinguishing steam. Unsuitable extinguishing media: Do not use dense water streams on the surface of molten bitumen due to the hazard of the violent splatter of hot bitumen. Water may be used only to cool down hot surfaces. 5.2. Special hazards arising from the substance or mixture Sticking of hot bitumen to body and clothing. Foaming and splatter occur when the hot product has contact with water. During a fire, released gases and vapors are heavier than air and can collect in depressions, spread just above the ground within a certain distance from the source of fire, and present a new combustion hazard. As a result of fire, the following compounds are formed: carbon monoxide, a compound mixture of bitumen millings, and – depending on composition – small amounts of sulfur oxides, nitric oxides, and metallic oxide fumes. 5.3. Advice for fire-fighters Small fires should be extinguished with sand, a dry powder extinguisher, or a carbon dioxide extinguisher; large The fire should be extinguished with expandable foam and diffused water currents. Persons participating in fire extinguishing operations should be trained, and wear a full set of anti-static protective clothing and equipment isolating the respiratory tract.

OXIDIZED BITUMEN 85/25 FEATURES

Oxidized Bitumen 85/25 Technical Details

This grade of Bitumen has higher penetration Although its softening point is lower than grade 90/15 In addition to penetration testing, there are tests used to determine Oxidized bitumen 85/25, including viscosity, shape, and heat loss, and flash point. and the most important items are penetration and softening point.

According to the ASTM D36 method, the softening point of this grade of bitumen is between 80 and 90 ° C and the flash point is 225 ° C.

Oxidized Bitumen 85/25 Applications

This type of bitumen is used for Varnish, Waterproof roofing membranes, coating and insulation, Asphalt paving, and many other projects in different regions.

Oxidized Bitumen 85/25 Formulation

Oxidized Bitumen 85/25 is semi-solid Bitumen known by some formula according to application in industries such as:

Elementally, it contains from 90% carbon and around 7% hydrogen, and other chemical contents are up to 1% sulfur, 1% nitrogen, 1% oxygen, and 2000ppm metals.

Bitumen Products are composed mainly of highly condensed polycyclic aromatic hydrocarbons.

Oxidized Bitumen 85/25 Packing

Packing of this type of bitumen would be 25 kg poly bags or 25 kg carton boxes with pallets or without pallets.

OXIDIZED BITUMEN 85/25 SPECIFICATION

SPECIFICATION	TEST METHOD	A.S.T.M.

PENETRATION AT 25 DEG C	20-30	D.5
SOFTENING POINT DEG C	80-90	D.36
DUCTILITY AT 25 DEG C CMS	3 MIN	D.113
LOSS ON HEATING PCT WT	0.2 MAX	D.6

FLASH POINT DEG C	225 MIN	D.92
SOLUBILITY IN CS2 PCT WT	99 MIN	D.4

Additional information

All Products

Reviews

Be the first to review “OXIDIZED BITUMEN 85/25”

Call Us

Email Us

Certificate Number

OXIDIZED BITUMEN 85/25

Enquiry Form

Product Info

OXIDIZED BITUMEN 85/25 MSDS

OXIDIZED BITUMEN 85/25 FEATURES

Oxidized Bitumen 85/25 Technical Details

Oxidized Bitumen 85/25 Applications

Oxidized Bitumen 85/25 Formulation

Oxidized Bitumen 85/25 Packing

OXIDIZED BITUMEN 85/25 SPECIFICATION

Additional information

All Products

Reviews

ABOUT US

CONTACT DETAILS

120 Harriet Ave Driehoek Johannesburg Gauteng 1400

+27 78 250 3879

sales@ansayolaonelchem.com

OXIDIZED BITUMEN 85/25

Enquiry Form

Product Info

OXIDIZED BITUMEN 85/25 MSDS

OXIDIZED BITUMEN 85/25 FEATURES

Oxidized Bitumen 85/25 Technical Details

Oxidized Bitumen 85/25 Applications

Oxidized Bitumen 85/25 Formulation

Oxidized Bitumen 85/25 Packing

OXIDIZED BITUMEN 85/25 SPECIFICATION

Additional information

All Products

Related products

Polymer Modified Bitumen

BITUMEN 60/70

BITUMEN 80/100

BITUMEN 50/70

Reviews